YENCCustom board manufacturing
☰

Drawing-reviewed manufacturing

Custom MDF
Slatwall Panels

Made to confirmed drawings for retail display, shopfitting and fixture projects.

  • Panel dimensions reviewed against drawing
  • Groove profile, spacing and direction customized
  • Aluminum or PVC inserts supplied and factory-fitted if required
Request a Drawing Review →
White slatwall panel with evenly machined horizontal grooves on production equipment
Project photo showing a machined rounded groove profile through an MDF panel
Groove profile — project photo
Illustration showing an aluminum insert fitted into a slatwall groove
Insert profile illustration
Board materialCommon commercial substrates available
Panel dimensionsReviewed against drawing
Groove layoutProfile, spacing and direction customized
Insert optionsAluminum or PVC; factory-fitted if required

Project-defined production

Specify the panel your fixture requires.

There is no single standard configuration for every slatwall project. We review the drawing, application, machining details and packing requirements before confirming production.

Board materials

Common commercial board substrates are available, subject to review of the required board type, grade, density, surface and compliance requirements.

Thickness & dimensions

Reviewed against drawing, application, machining details and packing requirements.

Groove design

Groove spacing, profile, depth and direction can be produced to confirmed drawings. Options include the rounded profile shown in the project photo, square profiles and drawing-specific designs.

Inserts

Aluminum or PVC inserts can be supplied and factory-fitted when required. Insert type, finish and compatibility are confirmed before production.

Close-up illustration of an aluminum insert seated inside a machined slatwall groove

Groove & insert coordination

One assembly, reviewed together.

The groove profile and insert must be evaluated as a compatible system. Send the proposed insert drawing or required profile with the panel drawing so fit and factory installation can be reviewed before production.

The image shown is an insert-profile illustration. Final construction follows the confirmed project drawing.

Manufacturing evidence

Real production. Real export handling.

Batch of slatwall panels with inserts during factory production
Batch production photo
Protected panel bundles being loaded into a shipping container
Container loading photo

Current factory records

Groove spacing, inserts and batch condition.

These photographs show actual custom MDF slatwall panel batches in the workshop. Groove direction, spacing, insert profile, surface and panel size remain drawing-specific for each retail display or shopfitting project.

White MDF slatwall panels with mixed groove spacing and metal inserts laid out in the YENC workshop
Workshop layout reference.
Finished white MDF slatwall panels with dark inserts stacked for protection
Finished batch stacked with face protection.
Close view of a stacked custom MDF slatwall panel batch showing repeated insert spacing
Repeated groove and insert spacing across the batch.

Short production videos

See the panel details before quotation.

Three short factory clips document groove and insert geometry, panel handling and a batch dimension check. They are production references, not a substitute for confirming your drawing and load requirements.

CNC groovingCNC routing footage showing grooves cut into a white MDF slatwall panel.
Panel stackingWorkshop footage of finished grooved panels being stacked for handling.
Rounded groove detailClose-up of the rounded groove and edge detail on an MDF slatwall panel.
Wrapped palletized panel products being loaded into a shipping container by forklift

Shipment reference

Palletized for container handling.

This loading record shows wrapped and strapped pallet units during container loading. Final pallet format, protection and moisture-control requirements are confirmed against panel dimensions, destination and shipment method.

  • Face and edge protection
  • Wrapped and strapped pallet units
  • Container plan confirmed per shipment

Export packing

Protection built around the shipment.

The packing method is reviewed with the panel format and shipment plan. The stated process uses layered protection for handling and sea transport.

Initial stretch film

The bundle is wrapped once with stretch film.

Thin MDF protection

Thin MDF protective sheets are placed around the bundle.

Four-side protection

Edge and corner protectors are added on all four sides.

Final stretch film

The protected bundle receives a final stretch-film wrap.

Packing straps

The completed bundle is secured with packing straps.

Container moisture control

Desiccant bags are placed inside the shipping container.

Start with your drawing

Request a project review.

Send the available drawing and project requirements. YENC will review manufacturability and the information needed for quotation.

  • Panel drawing and quantity
  • Board type and surface
  • Groove layout and direction
  • Aluminum or PVC insert requirement
  • Exposed-edge requirements
  • Destination and packing needs

Send Your Project Details →

Project enquiry

Send the panel drawing and project requirements.

Include dimensions, board type, groove layout, insert requirements, quantity and destination. YENC will review the available information before discussing manufacturability and quotation.

  • Drawing or reference file
  • Panel dimensions and quantity
  • Board surface and insert details
  • Destination and packing needs